MEJ-FMC400 Low Conductivity Electromagnetic flow meter

MEJ-FMC400 Low Conductivity Electromagnetic flow meter is a professional flow measurement equipment developed to address the measurement challenges of low conductivity fluids. Through special sensor design and signal processing technology, it breaks through the limitations of traditional electromagnetic flowmeters on fluid conductivity.

MEJ-FMC400 Low Conductivity Electromagnetic flow meter still follows Faraday’s law of electromagnetic induction, but uses higher sensitivity electrodes and stronger excitation systems to ensure stable and measurable weak electromotive force can be induced even when the fluid conductivity is low to the critical value. With advanced signal amplification, filtering, and anti-interference algorithms, it accurately extracts flow signals. ​

The core advantage of this flowmeter lies in its excellent adaptability to low conductivity fluids, which can stably and accurately measure media that are difficult to accurately measure with traditional instruments, such as deionized water, organic solvents, and some petroleum products; The measurement accuracy can reach ± 0.5% – ± 1%, and the range ratio is wide, covering from small flow rates to large flow rates; Simultaneously possessing strong anti-interference ability, effectively resisting the influence of external electromagnetic interference and fluid fluctuations, ensuring the reliability of measurement data.

In addition, MEJ-FMC400 Low Conductivity Electromagnetic flow meter adopts a structural design without mechanical moving parts, which has low pressure loss, is not easy to block, is easy to maintain, and has a long service life. ​

At present, low conductivity electromagnetic flow meters are widely used in ultra pure water measurement in the electronic semiconductor industry, purified water monitoring in the pharmaceutical industry, organic solvent transportation in the chemical industry, and flow measurement of syrup, juice and other fluids in the food and beverage industry, providing strong support for accurate flow monitoring and production control in various industries.

Features:
Reliable measurement, high accuracy, and good stability.
Integrated structure, no moving parts, easy to install, maintenance free.
RS485 communication interface – standard Modbus RTU protocol.
It is not affected by the direction of the fluid and can be accurately measured in both directions.
Adopting advanced low-frequency square wave excitation, zero point stability, strong anti-interference ability, and reliable operation.
The orientation of the header/display interface can be adjusted for easy reading.
Built in bilingual Chinese and English, allowing for free switching.
Suitable for measuring low conductivity media.
Suitable for slurry measurement.
Suitable for filling measurement.